V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Remove the upper screws (1) from the lower steering column cover
-
Unscrew the lower screw (2) a few turns
-
Fold the lower steering column cover down slightly, so that the mounting point for the left-hand control stalk is exposed.
-
Remove the left-hand control stalk. First remove the two screws. Then carefully pull the stalk outwards until it releases from the connector on the
inside.
-
Press the new stalk into place where the old one was positioned. Tighten the stalk using the existing screws
-
Reinstall the lower steering column cover. Tighten
-
Reinstall the upper steering column cover.
-
Program the function using VCT2000 in VIDA.