V50 L5-2.4L VIN 39 B5244S7 (2005)
Install on both sides:
-
the brake caliper
-
the 2 screws. Tighten. See: Tightening torque See: Specifications/Mechanical Specifications/Steering and Suspension/Suspension/System
Specifications
Install the brake hose in its console.
Finishing
Install the anti-roll bar. See: Rear Stabilizer Bar See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Rear.
Install on both sides:
-
springs according to: Spring, M56, MPS6, M66, MMT6, MTX75, IB5, AW55-50/51SN See: Steering and Suspension/Suspension/Suspension
Spring ( Coil / Leaf )/Service and Repair/Rear Suspension
-
wheels rear according to: Wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Carry out wheel alignment in accordance with: Wheel angles, check See: Maintenance/Alignment/Service and Repair.
Tighten the screw for the lower control arm. Tighten. See: Tightening torque See: Specifications/Mechanical Specifications/Steering and
Suspension/Suspension/System Specifications
