V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Repeat on the right-hand side, but first press the grille towards the left-hand mounting in the cantrail so that the sprung mounting in the grille
springs in, allowing the right-hand mounting to be positioned
-
Check that the grille is correctly positioned in both mountings in the cantrails. Tighten the nuts. Tighten to 11 Nm (9 lbf.ft.).
-
Install the protective caps on the nuts
-
Fold the grille up towards the roof. There are gas struts so a little force is required. Return the backrests to the upright position before folding the
grille down again.
Removing the cargo compartment safety grille
The grille must be down for removal. Fold the rear backrests forwards to relieve the load on the gas struts. Then detach the grille. See points 1 and 2.