V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Clean the surfaces where the roof spoiler is to be installed. Use a mixture of 30% windscreen washer fluid and 70% water. Wipe dry.
-
Treat the edges of the holes using a rust-proofing agent. Do not damage the mating surfaces of the roof spoiler and the cover plugs.
Note! To ensure the best results, it is recommended that two people install the roof spoiler on the tailgate.
Note! Remember that the spoiler must be installed symmetrically on the tailgate. Tip: Check that the studs are in the centre of the holes on the
inside of the tailgate.
Illustration A
-
Remove the backing from the mounting tape for the roof spoiler.
-
Remove the backing tape from the projection around the studs.
Illustration B
-
Each person should hold one end of the roof spoiler. Carefully insert the studs (1) in the underside of the roof spoiler in the front drilled holes.
Ensure that the tape is not sticking to the tailgate yet.
-
Open the tailgate. Screw in the two screws with washers (2) from the kit into the tailgate spoiler a few turns.
-
Press the roof spoiler against the tailgate so that the tape is properly secured (otherwise there is a risk of the tape coming loose when installing the
