V50 L5-2.4L VIN 39 B5244S7 (2005)
Note! To ensure a good result two persons should work together when pressing the spoiler into place against the trunk lid. The spoiler shall be
placed symmetrically on the trunk lid.
Hint: Look on the inside of the trunk lid and check that the guide pins end up in the center of the drilled holes.
Remove the protective film from the spoiler's mounting tape. Hold at one end each of the spoiler and carefully insert the guide pins in the holes in the
trunk lid.
Note! Firmly press down the spoiler against the trunk lid, and check that the tape has contact against the trunk lid across the whole tape
surface.
Open the trunk lid and remove the two guide pins.
Take screws, nuts, washers, and cover plugs from the kit. Apply locking fluid with part number 116 1370 on the screw threads.
Caution! Do not exceed the tightening torques below.
Install:
-
the screws, 2 pcs. M6, with washers. Tighten according to: Tightening torque See: Specifications
-
the nuts, 2 pcs. M6, with washers. Tighten according to: Tightening torque See: Specifications
Check-tighten the screws and nuts after 5 minutes.
