V50 L5-2.4L VIN 39 B5244S7 (2005)
Installation
Installing the thermostat housing
Clean the gasket surface for the thermostat housing against the engine block.
Install:
-
new gasket
-
thermostat housing
-
screws and tighten
-
inlet and outlet hoses. Tighten the hose clamps. Plug in the connector for the temperature sensor.
Finishing
Installing components
Install the air filter module according to Air filter module See: Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair.
Check
Fill with coolant. Refer to: See: Service and Repair
Test-run the engine and check for any leaks.