V50 L5-2.4L VIN 39 B5244S7 (2005)
Install the engine pad according to the markings.
Installing engine mounting
Install:
-
the engine mounting on the cylinder head
-
the limiter. Tighten the screws 1 and 2. Remove the lifting beam: 999 7103 and hook: 999 5185
-
the expansion tank.
Installing components in the rear edge of the engine
Install:
-
the lifting lug
-
the 2 screws for the lifting eyelet at the rear edge of the cylinder head. Tighten
-
the screw for the clamp for the fuel pressure pipe in the lifting eyelet. Tighten. Hook the evaporative emission system (EVAP) valve onto the
lifting eyelet. Connect the connector to the heated oxygen sensors (HO2S).
Installing upper intake manifold
Install: