V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Press the cable for the front engine block heater socket into the installed clips. Insert the cable at point (1). Route the cable through the engine
compartment (behind the A/C pipes) down to the strut at the mounting for the right-hand control arm.
Illustration B
-
Secure the cable from the top of the engine compartment downwards using a tie strap.
Note! The cable must not be secured to the fuel lines, air conditioning (A/C) pipes or brake pipes.
-
Secure the cable from the front engine block heater socket at the top by the strut. Use a tie strap from the kit.