V50 L5-2.4L VIN 39 B5244S7 (2005)
Drive Belt Tensioner: Service and Repair
Tensioner accessory drive belt
Special tools:
999 7109 Wrench See: Tools and Equipment/999 7109 Wrench
999 7103 Lifting beam See: Tools and Equipment/999 7103 Lifting Beam
999 5185 HOOK See: Tools and Equipment/999 5185 Hook
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing components
Raise the vehicle.
Remove:
-
the right front wheel
-
the right-hand fender liner. Slacken off the screws at the front edge and fold back the fender liner.
Removal
Removing the auxiliaries belts
Outer belt
Relieve the load from the belt tensioner. Use: 999 7109 Wrench See: Tools and Equipment/999 7109 Wrench. Turn the belt tensioner clockwise as far as
it will go. Remove the belt.
Inner belt
Relieve the load from the belt tensioner using a Torx-wrench. Turn the belt tensioner counter clockwise as far as it will go. Remove the belt.
