V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove:
-
the fuel rail mounting screws.
-
screw for the clamp for the fuel pressure pipe.
Blow the clean the injectors. Spray using universal oil or similar around the terminals of the injectors on the intake manifold.
Pull out the fuel rail and injectors. Do not work them loose from side to side. Separate the fuel line quick-release connector. Press the two blue plastic
buttons. Lift out the fuel rail.
Removing the lower intake manifold
Remove:
-
screws on the top row to the intake pipes. Loosen the screws on the lower row a few turns. Lift up the intake manifold and loosen the hose between
the oil trap and the intake manifold.
-
gasket and discard it.
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Tightening Torque
Installing the intake manifold and gasket
Note! Ensure that the gasket faces are clean.