V50 L5-2.4L VIN 39 B5244S7 (2005)
-
pulley on the exhaust camshaft according to the marking.
-
the 3 screws. Do not tighten.
Position the camshaft pulley according to the marking on the upper cam belt cover and remove the upper cam belt cover.
Installing timing belt
Caution: Ensure that the camshaft gear is still positioned according to the marking on the upper cam pulley. If not, repeat the exercise until the
markings match.
Tighten the centre screw on the cam belt tensioner with 5 Nm in the 10 o'clock position.
Install the belt in the following order:
-
the crankshaft
-
the idler pulley
-
intake camshaft gear
-
exhaust camshaft gear
-
water pump
-
tensioner pulley.
Tensioning of cam belt
This setting is done on a cold engine. A suitable temperature is about 20 ° C/68 ° F. At higher temperatures, for example with a warm engine or high