V50 L5-2.4L VIN 39 B5244S7 (2005)
Tire Pressure Sensor: Service and Repair
Pressure sensor tire
Operation number: 38641-2
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removal
Note! Removal steps in this procedure may contain installation details.
Remove the wheel.
Caution! Do not use tools within the marked area.
Caution! Always start outside the marked area and continue in the direction from the valve.
Caution! Release the tire bead from the wheel rim diagonally opposite to the valve.
Tighten the pressure sensor. Refer to: Tightening torque See: Specifications/Mechanical Specifications/Steering and Suspension/Suspension/System
Specifications
Installation
To install, reverse the removal procedure
Install the wheel. Refer to: Wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair
After replacing sensors, the control module does not need programming. The control module contacts the sensor itself after a few minutes driving. LF
initiator can be used.
