volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Power Steering - Pump and Harness Replacement|Page 16388 > < Power Steering - Pump and Harness Replacement|Page 16386
Page 6
background image

-

Route cable along front of car, above radiator. Use 3 clips [1, 2, 3] on harness to attach harness to coolant overflow hose.

-

Route cable between battery and fuse box, using wire ties to secure cable to existing harness at front of fuse box.

-

Install positive (red) cable at fuse box. Reinstall fuse. Tighten to 5 Nm /4 Lb-Ft.

-

Install negative (black) cable at previously removed ground connection. Tighten to 10 Nm /8 Lb-Ft.

-

Connect the smaller electrical connector to the power steering pump.

11.

Finishing work

-

Fill with power steering fluid up to the mark on the reservoir. Use Volvo power steering fluid, part no. 30741424.

Power Steering - Pump and Harness Replacement|Page 16388 > < Power Steering - Pump and Harness Replacement|Page 16386