V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove the screws on both sides.
Remove the 2 screws on both sides. Lower the sub-frame approximately 4 cm. Ensure that no cables/hoses are loaded or trapped when lowering the
sub-frame.
Removing the carbon filter container
NOTE: When removing the carbon filter container, ensure that the pipe sleeve (2) is not loaded.
Remove:
-
the 2 M5 screws securing the carbon filter container to the sub-frame
-
the 2 pipes, secured using quick-release connectors (1) the hose (2).
Pull the carbon filter container out of the mounting. Take out the carbon filter container over the rear muffler. Remove the container.
Installation
NOTE: For tightening torques, see Specifications.
Installing the carbon filter container
NOTE: When installing the carbon filter container, ensure that the pipe sleeve (2) is not loaded.
Position the carbon filter container on the subframe. Insert the carbon filter container over the rear muffler.
Install: