V50 L5-2.4L VIN 39 B5244S7 (2005)
Throttle Body: Procedures
Throttle body, cleaning
Removing the electronic throttle module (ETM)
Remove the electronic throttle module (ETM). See: Throttle body See: Removal and Replacement.
Cleaning the electronic throttle module (ETM)
Warning! Use a fume hood or ensure that ventilation is good.
Clean the electronic throttle module (ETM). Use cleaner 116 1436-9 and a brush. Ensure that all deposits are removed from the surfaces marked in the
illustration.
Cleaning the electronic throttle module (ETM) continued
Carefully wipe the inside of the air duct clean on both sides of the throttle disc. Wipe clean the edge of the throttle disc.
