V50 L5-2.4L VIN 39 B5244S7 (2005)
Normal value 4.5 -5.5 V.
The value indicates the internal power supply in the infotainment control module (ICM).
Read off the 3.3 V supply voltage
Measurement range 0-5 V.
Normal value 2.9 - 3.5 V.
The value indicates the internal power supply in the infotainment control module (ICM).
Number of control modules in the MOST network
The value indicates the number of control modules in the relevant MOST network. There may be 3 - 9 control modules.
Description of Activations
Vehicle Communication Information, Infotainment Control Module (ICM)
Description of activations
Display test Normal
Activates display test Normal.
Display test all pixels on
Activate display test all pixels on.
Display test all pixels off
Activate display test all pixels off.
Display test Predetermined pattern 1
Activate display test predetermined pattern 1.
Display test Predetermined pattern 2
Activate display test predetermined pattern 2.
Display test Predetermined pattern 3
Activate display test predetermined pattern 3.
Display test Predetermined pattern 4
Activate display test predetermined pattern 4.
Diagnostic Functions
Diagnostic functions
General
The control module has a built-in diagnostic system, Volvo Diagnostic, which continuously monitors internal functions as well as input and output
signals.
Diagnostic trouble codes (DTCs)
If the control module detects a fault, a diagnostic trouble code is generated. The control module can store up to 10 trouble codes. A fault that is detected
during the most recent operating cycle is defined as permanent. Other faults that are detected are defined as intermittent.
Reading and erasing diagnostic trouble codes (DTCs)
Stored diagnostic trouble codes (DTCs) can be read off and erased using this function.
Diagnostic trouble codes (DTCs) can only be erased once all the diagnostic trouble codes (DTCs) have been read off at least once.
Reading off the control module identification