volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 397 > < Initial Inspection and Diagnostic Overview|Page 395
Page 82
background image

Continue - DONE

-------------------------------------------------

Checking The Supply Voltage/Ground Terminal, Integrated Audio Module (IAM)

Checking the supply voltage/ground terminal

Checking the power supply and ground terminals

Power supply, Integrated Audio Module (IAM)

The Integrated Audio Module (IAM) is supplied with voltage via a voltage input on the control module.
With ignition on the voltage input is supplied with voltage and the Integrated Audio Module (IAM) is in active mode.

-

Voltage input 1 (#A1) is supplied with voltage via a fuse from the Central Electronic Module (CEM). The Integrated Audio Module (IAM) will
not be activated in the event of open circuits.

Checking the power supply

Check the power supply cable from the battery to the Central Electronic Module (CEM) and from the Central Electronic Module (CEM) to the
Integrated Audio Module (IAM) (#A1) with regard to open circuits, loose connections, contact resistance and corrosion. Check the fuse too. The voltage
should be approximate battery voltage with the ignition on.

Ground terminal, Integrated Audio Module (IAM)

Initial Inspection and Diagnostic Overview|Page 397 > < Initial Inspection and Diagnostic Overview|Page 395