V50 L5-2.4L VIN 39 B5244S7 (2005)
Indicates the status of the multimedia module (MMM).
OK = The unit is OK.
NOK = The unit has registered a fault when checking the unit (Not OK).
Description of Activations
Description of activations
Color scale display
Activating the color scale, display.
This activation is used to check that the colors in the display are presented correctly.
The colors from left to right are:
White, yellow, turquoise, green, magenta, red, blue and black.
Picture test display
Activating the picture test, display.
This activation is used to check the display resolution and to detect any distortion in the image.
On a correctly set display, the lines are straight and the circle round.
Gray scale display
Activating the gray scale, display.
This activation is used to check that the gray scales in the display are presented correctly.
Description of Reading Off of Extended Diagnostic Trouble Code (DTC) Information
Description of reading off of extended diagnostic trouble code (DTC) information
Contents
Select type of description:
-
Description of frozen values See: Scan Tool Testing and Procedures/Vehicle Communication Information, Multimedia Module
(MMM)/Description Of Frozen Values, MMM
-
Status identifier, description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description Of Status Identifier
-
Counters, description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description Of Counter
Description Of Frozen Values, MMM
Description of frozen values
Explanation
Not all the parameters described need to be implemented in the multimedia module (MMM). This varies from system to system.
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
Battery voltage, value
Measurement range: 5-24 V.
Normal value when the generator (GEN) is charging: 13.0-14.5 V.
Distance, value
Measurement range: 0-1000000 km.
The value indicates the total mileage of the car at the time the diagnostic trouble code (DTC) was stored.
Passenger compartment temperature, value
Measurement range: -40-80 °C.
The value indicates the passenger compartment temperature of the car at the time the diagnostic trouble code (DTC) was stored.