volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 409 > < Initial Inspection and Diagnostic Overview|Page 407
Page 94
background image

Outside temperature, value

Measurement range: -40-80 °C.
The value indicates the outside temperature at the time the diagnostic trouble code (DTC) was stored.

Engine running, status

The status displays whether the engine was running when the diagnostic trouble code (DTC) was stored.
No = the engine was not running
Yes = the engine was running

Time, value

The value displays the time that has passed since the diagnostic trouble code (DTC) was stored.

Connecting The Breakout Box, Audio Module (AUD)

Connecting the breakout box

Special tools:

951 1463 Adapter 22-16-14 pin See: Tools and Equipment/951 1463 Adapter 22-16-14 pin 
951 1428 Breakout box  See: Tools and Equipment/951 1428 Breakout box 
951 1507 Adapter 12-12-8-4-2 Pin  See: Tools and Equipment/951 1507 Adapter 12-12-8-4-2 Pin 
951 2888 16-pin AUD adapter See: Tools and Equipment/951 2888 16-Pin AUD Adapter 

Connecting the breakout box

-

Ignition off

-

Expose the audio module (AUD)

-

Remove the fuse for the audio module (AUD).

Connect adapter 951 1463 Adapter 22-16-14 pin See: Tools and Equipment/951 1463 Adapter 22-16-14 pin  to the control module connector and
connect breakout box 951 1428 Breakout box  See: Tools and Equipment/951 1428 Breakout box  to the adapter. Audio module (AUD) terminals
#C1-#C22 correspond to terminals #1-#22 on the breakout box. Connect adapter 951 1507 Adapter 12-12-8-4-2 Pin  See: Tools and Equipment/951
1507 Adapter 12-12-8-4-2 Pin  to the control module connector and connect breakout box 951 1428 Breakout box  See: Tools and Equipment/951 1428

Initial Inspection and Diagnostic Overview|Page 409 > < Initial Inspection and Diagnostic Overview|Page 407