V50 L5-2.4L VIN 39 B5244S7 (2005)
Check
Check 1
Checking the power supply to Gas Discharge Lamp Module (GDL)
Conditions (unless otherwise specified): Ignition off.
-
Connect the breakout box for the Central electronic module (CEM).
-
Ignition on.
-
Light switch in position 2.
Take readings between:
-
Central electronic module (CEM) #E1 (#1) and ground.
Hint: This output powers both the left and right Gas Discharge Lamp Module (GDL).
The power supply to the Gas Discharge Lamp Module (GDL) must be 12 V and must not exceed 19 V.