volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Central Electronic Module (CEM)|Page 1443 > < Central Electronic Module (CEM)|Page 1441
Page 1
background image

Relay Box: Service and Repair

Control module relay box passenger compartment

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Disconnecting the battery negative lead

Caution! The driver information module (DIM) must not be replaced at the same time. This would erase the mileage.

Note! Automatic alarms to the emergency services can be triggered if the vehicle is fitted with Volvo On Call.

Note! Applies to 2005-. Check which mode global opening/closing is programmed in and make a note of it. See Vehicle communication,
Programming global opening/closing window.

Disconnect the battery negative lead. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting

Removal

Removing the passenger side soundproofing panel

Remove:

-

the 2 clips

-

the soundproofing panel. Pull straight down, then backwards.

Removing the central electronic module (CEM) / relay box

Central Electronic Module (CEM)|Page 1443 > < Central Electronic Module (CEM)|Page 1441