volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Accessory Control Module (AEM)|Page 1508 > < Accessory Control Module (AEM)|Page 1506
Page 3
background image

Removing the side cushion:

-

Grasp the upper edge of the right-hand side cushion. Pull the side cushion forward so that the clip on the reverse releases.

-

Slide the side cushion upwards.

Removing the panel at the front/top of the side panel:

-

Remove the screw at the rear edge of the panel at the front/top of the right-hand side panel.

-

Pull the panel upwards so that the four clips on the inside release.

-

Pull off the rubber strip at the rear of the opening for the right-hand rear door.

Removing the lower panel on the C-post:

-

Carefully pry off the lower panel on the C-post on the right-hand side. Carefully pry at the top edge. Use a plastic weatherstrip tool.

-

Pull the panel on the C-post so that the two upper clips release. Then continue pulling downwards until the last two clips release.

Removing the side panel:

-

Fold out the load securing eyelets on the right-hand side panel.

-

Insert a scriber with an angled tip into the holes in the top of the covers (1). Turn the scriber so that the tip engages the reverse of the cover. Pull
the cover off.

-

Remove the screws in the load securing eyelets.

Accessory Control Module (AEM)|Page 1508 > < Accessory Control Module (AEM)|Page 1506