V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Check that no pins or sockets are damaged on the connector.
-
Carefully press the control module down into the grooves on the inside of the control module box. Press to the limit position
-
Insert tool 999 5722 Wrench See: Tools and Equipment/999 5722 Wrench around the control module.
-
Move the upper section of the tool forwards as far as it will go. Pull up the tool
-
Press the cover into place over the control modules
-
Check that the air ducts are correctly positioned.
Ordering software
Order the applicable software. See: Testing and Inspection/Programming and Relearning/Software Downloading
Finishing
Check that no diagnostic trouble codes have been stored during the repair.
Test drive the car. Check the function of the engine.