V50 L5-2.4L VIN 39 B5244S7 (2005)
-
the 2 screws under the seat
-
the connector at the end mounting
-
the connectors from the multi-connector.
Installation
Installing the occupant weight sensor (OWS)
Install the heating element.
Refer to: Heating coil front seat
NOTE: Ensure that the wiring is routed through the holes exactly as illustrated.
CAUTION: Do not pinch the hose from the silicon pad to the pressure sensor during installation.
CAUTION: Do not pinch the hose from the silicon pad to the pressure sensor during installation.
Install:
-
the 2 screws. Tighten
-
the connector at the end mounting
-
the connectors on the multi-connector
-
the pressure sensor/silicon cushion on the bracket under the seat. Secure the silicon hose in the clip/holder
-
the pressure sensor/silicon cushion using 2 clips
