V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Install the ISOFIX mounting from the kit over the welded nuts. Tighten the mounting using the two screws. Tighten to 40 Nm (30 lbf. ft.).
-
Fold the floor carpet back into place. Insert the ISOFIX mounting eyelets in the two cut-outs. Insert the rear edge of the floor carpet under the
floor support. Carefully pry up the floor support if necessary to get it into place
-
Move the backrest back into place. Tighten the screw. Tighten to 40 Nm (30 lbf. ft.)
-
Reinstall the side cushion
-
Fold the seat cushion back into place.
ISOFIX-Guide
ISOFIX-guide
