volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Discarding Pyrotechnic Components|Page 18560 > < Discarding Pyrotechnic Components|Page 18558
Page 40
background image

Install the gas generator without inflatable curtain in its normal screw joint on the mounting bracket.

Note! Direct the inflatable curtain component away from the user and make sure it extends away from the gas generator.

Screw the mounting bracket to the fixture.

Destruction of inflatable curtain (IC)

Connecting cables to the inflatable curtain (IC)

Remove the key from the discharge box and store so that it is inaccessible for unauthorized use.
Select the correct adapter cable for the gas generator.
Connect the adapter cable to the inflatable curtain. Check that it is properly connected.

Warning! Remove all loose objects on, or directly connected to, the gas generator.

Lay out the connection cable so that the user is 9 m from the inflatable curtain.
Connect the adapter cable to the connection cable and fully extend the leads.
Connect the cable to the discharge box.
Connect the discharge box to a fully charged 12 V battery.

Destruction of inflatable curtain (IC)

Insert the key and turn it to position 1.
Destroy the gas generator by connecting the rocker switch and push-button.
Turn the key to position 0.
Remove the key from the discharge box and store so that it is inaccessible for unauthorized use.

Warning! Use pliers when removing due to heat development.

If the adapter cable is still attached, detach the adapter cable from the gas generator as soon as possible after destruction. Use protective safety gloves.
Remove the destroyed gas generator from the fixture.

Discarding Pyrotechnic Components|Page 18560 > < Discarding Pyrotechnic Components|Page 18558