V50 L5-2.4L VIN 39 B5244S7 (2005)
Remove the key from the discharge box and store so that it is inaccessible for unauthorized use.
Select the correct adapter cable for the gas generator.
Connect the adapter cable to the roll bar (ROPS) gas generator. Check that it is properly connected.
Warning! Remove all loose objects on, or directly connected to, the gas generator.
Lay out the connection cable so that the user is 9 m from the roll bar (ROPS).
Connect the adapter cable to the connection cable and fully extend the leads.
Connect the cable to the discharge box.
Connect the discharge box to a fully charged 12 V battery.
Insert the key and turn it to position 1.
Destroy the roll bar (ROPS) gas generator by connecting the rocker switch and push-button.
Turn the key to position 0.
Remove the key from the discharge box and store so that it is inaccessible for unauthorized use.
Warning! Use pliers when removing due to heat development.
If the adapter cable is still attached, detach the adapter cable from the gas generator as soon as possible after destruction. Use protective safety gloves.
Remove the destroyed roll bar (ROPS) from the fixture.
