V50 L5-2.4L VIN 39 B5244S7 (2005)
Removing the upper panel on the C-post:
-
Repeat for the panel on the lower C-post (C), but now three clips should release.
Removing the side panel:
-
Fold out the load securing eyelets on the right-hand side panel.
-
Insert a scriber with an angled tip into the holes in the top of the covers (1). Turn the scriber so that the tip engages the reverse of the cover. Pull
the covers off.
-
Remove the screws in the load securing eyelets.
-
Remove the screw (2) at the front/top edge of the side panel.
-
Pull off the side panel at the top so that the two clips at the rear/bottom of the side window and the clip at the bottom of the D-post release.
-
Lift out the side panel.
Removing the panel on the D-post:
-
Carefully pry off the right-hand panel on the D-post at the lower edge. Use a plastic weatherstrip tool.
-
Pull the panel on the D-post forwards so that the two clips on the lower edge release. Continue to pull forwards, until the two clips further up
release.
-
Unhook the panel on the D-post backwards from the roof panel.
Note! Do not damage the panels.
