V50 L5-2.4L VIN 39 B5244S7 (2005)
Install:
-
the new sensors. Apply a little automatic transmission fluid to the O-rings for the sensors. Tighten. See: Tightening torque See:
Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/System Specifications/Tightening Torque
-
the cable harness connector to the transmission control module (TCM).
Finishing
Installing the battery lead
Install:
-
the box for the battery
-
the battery negative lead. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
