V50 L5-2.4L VIN 39 B5244S7 (2005)
Fluid Pan: Specifications
Tightening torque
General tightening torques
Caution! Screws coated with a locking fluid or self locking nuts must be replaced with new when reinstalled.
See the table below to find the tightening torques for components not included in the summary.
Nuts and screws which are not self locking can be reused provided that they are in good condition.
Summary of tightening torques for specific components
Caution! Screws coated with locking fluid or sealant must be replaced with new ones when reinstalling.
Always use new screws and nuts when angle tightening. Any exceptions to this rule will be indicated in the method.
Angle tightening in tight spaces, see Screwed joint, torque/angle tightening See: Description and Operation/Screwed Joint, Torque/Angle Tightening.
