V50 L5-2.4L VIN 39 B5244S7 (2005)
Valve Body: Service and Repair
Control System, Replacing
Temperature sensor fluid, transaxle, (TFT)
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Preparatory work
Removing components
Remove:
-
the transmission control module (TCM). See: Transmission Control Module (TCM) See: Service and Repair/Removal and
Replacement/Automatic Transmission Components/Transmission Control Module (TCM)
-
the control system cover. See: Cover, control system See: Fluid Pan/Service and Repair.
Removal
Removing the cable harness
Remove:
-
the connectors for the solenoid valves
-
the screw for the oil temperature sensor holder. Detach the sensor from the control system
-
the cable harness from the holders on the control system
-
the cable harness.
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Starting and Charging
Checking the seal for the cable harness
Check that the seal for the cable harness connector is fault free and in position.
Installing the cable harness for the transmission