V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
Turn the bumper cover and drill out the holes from the outside. Use a -27.5 mm diameter special drill bit (P/N 9997114).
Note! Drill slowly and with pressure to avoid melting the plastic and creating a collar on the reverse.
-
Provisionally reinstall the bumper on the car. Mark out corresponding holes in the foam through the inner holes in the bumper cover
-
Remove the bumper from the car.
Cut-out in the front of the foam
Illustration A
-
Localize the markings (1) in the foam.