volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Towbar, Wiring, 4-pin|Page 23058 > < Towbar, Wiring, 4-pin|Page 23056
Page 8
background image

-

Remove the cargo compartment carpet.

-

Prize off the four external clips at the front edge/bottom edge of the sill trim panel on the tailgate.

-

Pry up one of the corners of the sill trim panel so that the two clips at that end release. Use a weatherstrip tool.

-

Pull up the sill trim panel so the remaining six clips release. Remove the panel.

-

Detach the rubber strip where it covers the right-hand side panel in the tailgate opening.

-

Fold the seat cushion and backrest on the right-hand side of the rear seat forward.

-

Grasp the upper edge of the right-hand side cushion. Pull the side cushion forward so that the clip on the reverse releases (A).

-

Slide the side cushion upwards.

-

Remove the screw at the rear edge of the panel at the front/top of the right-hand side panel (B).

-

Pull the panel upwards so that the four clips on the inside release.

Towbar, Wiring, 4-pin|Page 23058 > < Towbar, Wiring, 4-pin|Page 23056