V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
Route the cable down underneath the collision member's right-hand mounting and secure it using the joined cable ties from the kit.
-
Take pliers, part no. 9987596, and widen the hole in the rubber grommet. Pull the wiring through. Adjust the length of the cable harness up to the
rubber grommet.
-
Insert the cable harness into the cargo compartment through the hole in the car body. Press the rubber grommet into place.
Illustration A applies to the V50 without RTI (road traffic information)
