V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
Install four M10x25 flange screws, which are screwed through the tow hitch cradle and reinforcement stay in the mounting plate. Do not tighten
yet.
-
Tighten the L profile's four M10 screws (1) alternating so that the L profile and the inner member of the bumper lie against each other correctly.
Tightening torque: 47 Nm (35 lbf.ft).
-
Tighten the four M10 screws (2) of the towbar retainer and reinforcement stay alternating. Tightening torque: 47 Nm (35 lbf.ft).
-
Tighten the two M14 screws (3). Tightening torque: 200 Nm (147 lbf.ft).
-
Tighten the six screws (4) for the reinforcement stay's front mountings alternately. Torque tighten to 20 Nm (15 lbf.ft), angle tighten to 90°. There
is not much space for torque tightening the middle screw, use special tool, 9814102 with a 3/8" socket extension.
