V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Press the side panel into place. Start at the front edge.
Hint: Detach the sill trim panel. Pull the sill trim panel straight up so that it is easier to install the side panel in the rear edge.
Press the lower part of the panel on the C-post into place.
Install:
-
the molding in the door opening
-
1 M5 screw. Tighten.
-
the panel over the seat belt reel. Use the 1 M5 screw. Tighten
-
the loading eyes using the 2 M8 screws. Tighten
-
the 2 covers for the loading eyes
-
the outer load floor.
-
the side cushion, see: Side pad See: Seats/Service and Repair/Removal and Replacement/Rear Seat.
Cantrail Panel
Cant rail panel
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
