V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
Grasp the upper edge of the left-hand side cushion A. Pull the side cushion forward so that the clips on the reverse release.
-
Remove the side cushion by sliding it upwards.
-
Remove the screw for the left-hand rear backrest mounting in the body. Fold up the bracket over the mounting in the backrest.
-
Lift up the free end of the backrest and pull it off from the right.
-
Position the backrest behind the backrest of the front seats.
-
Pull off the rear edge of the floor carpet from the floor support. Fold the carpet to one side to expose the attachment points for the ISOFIX
mounting in the floor.
-
Remove the screws from the support bracket, new screws are in the kit.
-
Remove the cover plug from the floor, it will no longer be used.
