V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
Grasp the upper edge of the left-hand side cushion. Pull the side cushion forward so that the clips on the reverse release
-
Remove the side cushion by sliding it up.
-
Remove the screw for the mounting in the chassis for the left-hand rear backrest. Fold up the bracket over the mounting in the backrest
-
Lift up the free end of the backrest and pull it off from the right
-
Position the backrest behind the front seat backrest.
-
Pull the rear edge of the floor carpet off the floor support. Fold back the carpet to expose the mounting points for the Isofix mounting in the floor
-
Remove the screw from the support bracket. There is a new screw in the kit
-
Remove the blind cover plug in the floor, it will not be used again.