V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Allow the primer to dry for 10 minutes.
Cut the adhesive nozzle as follows
M3 = 8 mm
M4 = 18.5 mm
M5 = 9 mm.
Caution! To make sure that the adhesive is properly mixed, apply a 10 cm adhesive bead in a piece of paper.
Note! Do not leave any adhesive in the area M2 as this results in a risk of spills.
Apply adhesive to the adhesive surface of the spoiler. M2 = 20 mm.