V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
the 3 x screws on each side
-
the clips (2), 1 per side. Pull off the spoiler from the 14 x bumper cover catches.
Hint: Start with the end nuts.
Opening for tail pipe and /or tow hitch
Caution! Do not damage the painted surface of the spoiler.
Apply tape to the outside of the spoiler, opposite both markings on the left and right-hand sides of the spoiler.
Make the cut-out according to the markings.
Cut so that the raised edge on the inside marking the cut-out remains.
Smooth off the sawn edges using a fine toothed file. Remove the tape.
Install the new 3 x spring nuts on each side of the new spoiler.
Opening for the tail pipe (vehicles with turbocharged engine B5xx4T3)
Vehicles with tow hitch
On vehicles with a tow hitch, cut-outs must be made in the new spoiler for the bumper cover. See illustrations A, B and C.
