V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Caution! Clean the surfaces of the bumper cover where the new spoiler section is to be secured. Otherwise there is risk of paintwork damage.
Hint: Start in the center. Check that the catches engage.
Press the new spoiler section into place on the bumper cover.
Install:
-
the clips (2), 1 per side
-
the 3 x screws (1) per side. Tighten.
Install the 2 x screws (1). Tighten.
Spoiler, Front
Spoiler, front
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.