V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Install the engine pad according to the markings.
Installing engine mounting
Install:
-
the engine mounting on the cylinder head
-
the limiter. Tighten. Remove the lifting beam: 999 7103 and hook: 999 5185
-
the expansion tank.
Installing components in the rear edge of the engine
Install:
-
the lifting lug
-
the 2 screws for the lifting eyelet at the rear edge of the cylinder head. Tighten
-
the screw for the clamp for the fuel pressure pipe in the lifting eyelet. Tighten.
Hook the evaporative emission system (EVAP) valve onto the lifting eyelet.
