V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
the engine mounting on the cylinder head
-
the limiter. Tighten. Remove lifting beam 999 7103 Lifting beam See: Tools and Equipment/999 7103 Lifting Beam
and hook999 5185 HOOK See: Tools and Equipment/999 5185 Hook
-
the expansion tank.
Installing components in the rear edge of the engine
Install:
-
the lifting lug
-
the 2 screws for the lifting eyelet at the rear edge of the cylinder head. Tighten
-
the screw for the clamp for the fuel pressure pipe in the lifting eyelet. Tighten.
Hook the evaporative emission system (EVAP) valve onto the lifting eyelet.
Connect the connectors to the heated oxygen sensors (HO2S).
Installing the intake manifold to the turbocharger (TC)
