V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Installation of belt tensioner
When installing the outer belt tensioner, turn the belt tensioner clockwise (1) and hold it in position.
Tighten the screw (2).
Tightening torque: 42 Nm. (30 ft-lb)
This will allow clearance between the upper and lower tensioner.
Caution!
Check that the position of the belt tensioner is correct; adjustment must only be carried out when the belt has been removed.
Install the belt.
Labor Claim Information
