V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
-
the feed line to the servo pump and remove the seals
-
front/lower belt protection cover and tighten the screw
-
the outer auxiliary unit belt. Wind up the tensioner. Use: 999 7109. Fit the belt.
-
the wing liner
-
the front wheel
Fitting of exhaust manifold
Install:
-
new seal, ensure the surfaces are clean. Lift up the exhaust manifold
-
new nuts. Tighten as shown: Tightening torque
-
the heat shield plate.
Installing catalytic converter
Install: