V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Remove the blind cover plug from the hole for the adjustment tool. Turn the crankshaft clockwise slightly. Use: 999 5451.
Aligning the crankshaft
Turn the crankshaft counter-clockwise until it stops against the adjustment tool.
Check that the marking on the crankshaft timing gear pulley corresponds to the marking on the oil pump.
Installing the variable valve timing (VVT) unit on the camshaft
Carefully press the timing gear pulley and variable valve timing (VVT) unit on to the camshaft. Set the variable valve time (VVT) unit according to
the marking.
Install:
-
the center screw that secures the VVT unit to the camshaft. Do not tighten the screw
-
the upper timing belt cover.
Installing the timing belt
Caution: Ensure that the camshaft pulley is still positioned according to the marking on the upper timing belt cover. If not, repeat the procedure until
the markings correspond.