V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Remove:
-
screws for the intake manifold in the front cover plate
-
the intake manifold for the air cleaner (ACL) module (1)
-
the hose for the mass air flow (MAF) sensor (2). Disconnect the connector for the mass air flow (MAF) sensor
-
the brake vacuum hose from the intake manifold
-
the brake vacuum hose from the vacuum pump. Move the hoses to one side.
-
the tie straps of the cable harness on the air cleaner module
-
the screw holding the cable harness and free the cable harness below the air cleaner module.
Installation
Installing the lifting tool