V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Remove:
-
wiper / washer switch with the screws (1), x 2
-
the turn signal lamp switch with the screws (2), x 2.
CAUTION: The pins on the wiper and turn signal lamp switch are fragile. Carefully pull straight out.
Remove:
-
the 2 screws (1)
-
the contact reel / steering wheel module (SWM) by releasing the catch (2) on the top.
Pull the contact reel / steering wheel module (SWM) back slightly.
Disconnect the connectors, x 2.
Installation:
Installing the contact reel/Steering wheel module (SWM)
Install the contact reel/Steering wheel module (SWM).
NOTE: Check carefully that the catch engages in the top of the contact reel / steering wheel module (SWM).
Install the upper mounting using the 2 x M5 screws. Tighten. See: Summary of tightening torques for specific components.