V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Seat Belt Retractor: Service and Repair
Front Safety Belt Retractor
Front safety belt retractor
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Adjusting the seat and disconnecting the battery cable
Slide the seat forward as far as possible.
Ignition off.
Disconnect the battery negative cable. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Warning! For information about the handling and storage of pyrotechnical SRS units, see: Handling non-deployed pyrotechnical part See:
Service and Repair/Handling Non-Deployed Pyrotechnical Part
Warning! Never measure with an ohmmeter or other live measuring instrument on a disconnected, non-deployed pyrotechnical SRS unit.
There is a risk of the seat belt tensioner deploying.
Warning! A pyrotechnical SRS unit must never be dismantled, repaired, or moved to another vehicle.
Removal
Removing front seat belts