V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Steering Angle Sensor: Adjustments
Angle sensor, steering wheel, resetting
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Important information
Caution! Ensure that the front wheels are pointing straight ahead before resetting and locking the contact reel.
Resetting
Resetting and locking contact reel, driver's airbag (SRS)
Turn the contact reel clockwise to the limit position (1).
Then turn the contact reel counter clockwise 2 whole turns (2).
Then turn counter clockwise further until the screw hole is at "11 o'clock" (3). See the illustration.
Note! The white marking must be visible through the window with the contact reel (4) in the correct position.
Install the Torx 10 screw. Tighten carefully.
The contact reel is now reset and locked (secured).
